6. Bulk Reprocessing

What is Bulk reprocessing?

• In bulk processing, we have a bulk control board which is a dashboard where we monitor bulk Processing where we have a scheduler and even we can do it manually, we can select attachments or file manually.
• It will pick up a record from the file and processed it, then we can see messages in the message monitoring.
• Bulk reprocessing is when we are reprocessing an attachment inside bulk inbox and it gets failed then it will be bulk reprocessing.
• But if we have 5 messages in the basket and 4 of them show a green flag and 1 shows the red flag in message monitoring then it means we need to do message reprocessing not bulk reprocessing because the message got failed not Bulk.
• SKYVVA Bulk Interface Processing is an interface uses for running bulk attachments. When you have much data, using Bulk Interface Processing is necessary (over 5000 records).

Pre-requisite

• Create Integration.
• Create the Interface. (Inbound Interface)

How to create Bulk using “Use Auto-Switch Mode”?

Auto-switch mode is a data processing mode. To check this mode, Follow steps given below:

• Open Interface
• Click on the Edit button.

• Check the "Use Auto-Switch Mode" field.

• Upload data using an agent.
• Now open Bulk control board, then select Interface and search. Check the Bulk data inbox.

• Firstly select the attachment and then set scheduler time and run Reprocessing. As shown below.

• After reprocessing, we can see reprocessed attachment in Bulk Data Monitor.